Product Specification and Technical Data
PRODUCT: BG RF-7
PART NO.: 107
ASTM TesT Method
Typical Test Result
API Gravity @ 15.6°C (60°F)
Specific Gravity @ 15.6°C (60°F)
U.S. lbs./gal. (kg/L) @ 15.6°C (60°F)
Flash Point, COC
Viscosity, cSt @ 100°C (212°F)
Viscosity, cSt 40°C (104°F)
PROBLEM: High engine operating temperatures and heavy loads often deplete oil additives and cause oil to become so thin that it fails to provide a sufficient lubricating film. When this occurs, oil will often oxidize and lose its ability to provide adequate engine protection.
SOLUTION: BG RF-7 helps increase engine compression and power by increasing the viscosity of the oil. BG RF-7 contains additives that keep engine oil from oxidizing thus protecting internal engine parts from corrosive damage.
• Conditions seals to prevent leaks
• Increases oil pressure
• Provides protection against wear
• Helps seal rings to increase compression and reduce blow-by
• Helps reduce oil consumption and exhaust smoke
• Reduces lifter and valve noise.
BG RF-7 is compatible with any petroleum base oil, synthetic and non-synthetic.
USAGE: Add BG RF-7 to crankcase when oil is changed or between oil changes to bring oil level to full mark. One 2 fl. oz. (60 mL) bottle treats up to 2 quarts (2 Liters) of engine oil. One 3 fl. oz. (100 mL) bottle treats 2-3 quarts (2-3 Liters) of engine oil. One 6 fl. oz. (166 mL) bottle treats 3-4 quarts (3-4 Liters) of engine oil. One 11 fl. oz. (325 mL) can treats 4-5 quarts (4-5 Liters) of engine oil. Do not overfill.
BG Products, Inc., accepts no liability for excessive use or misuse of this product.
IV•XVII ©copyright 2017 BG Products, Inc. • Wichita, KS 67213 • www.bgprod.com